Full-Service Roofing | Fort Covington, NY
Everything we do is roofing. That focus means our Fort Covington crews install more roofs per year than companies that try to do siding, windows, and remodeling on the side.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →
Roof Repair
We repair asphalt shingle, metal, flat membrane, and tile roofs. Our trucks carry common repair materials so most fixes happen same-visit. Shingle repairs, flashing replacement, pipe boot swaps, ridge cap fixes, valley re-flashing. All routine for our Fort Covington crews.
Get a Free Quote →
Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →
New Roof Installation
Building a custom home in Fort Covington? We work directly with you and your architect on material selection, color coordination, and budget planning. From designer shingles to standing seam metal, we install it all and back it with manufacturer plus workmanship warranties.
Get a Free Quote →
Metal Roofing
We install 24-gauge and 26-gauge steel standing seam panels in Galvalume and pre-painted finishes. Concealed fastener clips allow the panels to expand and contract with temperature changes without stress on the fasteners. That's why standing seam doesn't leak. The clips float.
Get a Free Quote →
Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in New York's weather.
Get a Free Quote →
Flat Roofing
Flat roof leak detection in Fort Covington: we start with a visual inspection of seams, flashings, and penetrations. If the leak source isn't obvious, we use electronic leak detection (ELD) or flood testing on membrane roofs. We find it and fix it. No guessing, no unnecessary tear-offs.
Get a Free Quote →
Commercial Roofing
For commercial kitchens and restaurants in Fort Covington, PVC membrane is the only option that resists animal fat and chemical exposure from rooftop grease exhaust. We install IB Roof Systems and Duro-Last PVC with heat-welded seams and custom accessories. Modified bitumen with SBS or APP polymer-modified asphalt for high-traffic commercial roofs. Two-ply systems with 20-year NDL (No Dollar Limit) warranties from Johns Manville or Firestone.
Get a Free Quote →
Gutter Installation
Gutter replacement in Fort Covington costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →
Roof Inspection
We don't inspect roofs from the ground with binoculars. We get on the roof. Every inspection includes a full walkthrough: shingle condition, flashing integrity, pipe boots, ridge vent, soffit ventilation, gutter function, and visible attic moisture signs. You get photos and a written report.
Get a Free Quote →
Emergency Roof Repair
Fallen tree damage requires immediate structural assessment before tarping. If a tree has displaced rafters, cracked a ridge beam, or pushed through ceiling joists, the structure is compromised. We assess from both exterior and attic, coordinate with structural engineers or framing contractors when needed, and tarp only areas that are structurally stable enough to support the tarp hardware. Insurance claims for tree strikes require separate line items for tree removal, structural repair, and roofing repair. We document each scope independently.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →